Toolox 33: Quenched and tempered low-alloyed steel good machinability, high toughness an low residual stresses. Can easily be polished, grained, eroded, etched, sliced, welded, nitrided, and coated with PVD (Physical Vapour Deposition). Further heat treatment is not intended. Working hardness without nitriding: approx. 30-36 HRC (delivery condition).
Toolox 33: Mechanical engineering, machine parts, guide rails, base plates, assembling parts, press brake tools, plate forming tools, wear parts, plastic moulds, moulding frames, forming tools, rubber moulds, die casting moulds.
|C||022||up to||024||Ni||-||up to||10|
|Si||06||up to||11||V||01||up to||011|
|Mn||08||up to||08||W||-||up to||-|
|P||-||up to||001||Cu||-||up to||-|
|S||-||up to||0003||N||-||up to||-|
|Cr||10||up to||12||Ti||-||up to||-|
|Mo||03||up to||03||Co||-||up to||-|
Data given should to be taken as a guideline value.
|is a registered trademark firstname.lastname@example.org||GTC|
|Abrams Engineering Services GmbH & Co. KG||T*: +44 (0) 121 368 0910||www.premium-steel.co.uk||DISCLAIMER|
|Hannoversche Str. 38 • 49084 Osnabrueck / Germanyemail@example.com||shop.premium-steel.co.uk||IMPRINT|
|* The domestic service numbers listed here are used to reduce the costs for our clientele in Great Britain. You will be redirected to our native English speaking accounts managers in Germany.|