BS 1.2738: Steel grade with focus on plastic mould making, nickel additives for a better through-hardenability (constant strength), also for thicknesses > 400 mm. Low sulphur steel and therefore polishable and grainable. Working hardness: approx. 32 HRC (delivery condition: quenched and tempered) up to 50 HRC.
BS 1.2738: Plastic moulds, moulding frames, die casting moulds, dies, forging tools, metal extrusion tools, tube presses, hydroforming tools.
|C||035||up to||045||Ni||09||up to||12|
|Si||02||up to||04||V||-||up to||-|
|Mn||13||up to||16||W||-||up to||-|
|P||-||up to||003||Cu||-||up to||-|
|S||-||up to||003||N||-||up to||-|
|Cr||18||up to||21||Ti||-||up to||-|
|Mo||015||up to||025||Co||-||up to||-|
Data given should to be taken as a guideline value.
|is a registered trademark firstname.lastname@example.org||GTC|
|Abrams Engineering Services GmbH & Co. KG||T*: +44 (0) 121 368 0910||www.premium-steel.co.uk||DISCLAIMER|
|Hannoversche Str. 38 • 49084 Osnabrueck / Germanyemail@example.com||shop.premium-steel.co.uk||IMPRINT|
|* The domestic service numbers listed here are used to reduce the costs for our clientele in Great Britain. You will be redirected to our native English speaking accounts managers in Germany.|