BS 1.2085: Pre-hardened, corrosion-resistant plastic mould steel. Magnetisable with good machinability. Resistant to aggressive plastics and humid conditions. Because of the added sulphur it is easier to machine than steel grade BS 1.2316. Further heat treatment is not intended. Working hardness: approx. 33 HRC (delivery condition) up to 48 HRC. Note: BS 1.2085 will be delivered in tempered condition (approx. 33 HRC). Therefore it can be easily substituted with BS 1.2099.
BS 1.2085: Mechanical engineering, apparatus engineering, plastic processing, injection tools, base plates, assembling parts, moulding frames, plastic moulds, extrusion tools, valves, steam valves, water valves, fittings parts, pump construction, pump rods, compressor construction, compressor parts, surgical instruments.
|C||028||up to||038||Ni||-||up to||10|
|Si||-||up to||10||V||-||up to||-|
|Mn||-||up to||14||W||-||up to||-|
|P||-||up to||003||Cu||-||up to||-|
|S||005||up to||01||N||-||up to||-|
|Cr||150||up to||170||Ti||-||up to||-|
|Mo||-||up to||-||Co||-||up to||-|
Data given should to be taken as a guideline value.
|is a registered trademark email@example.com||GTC|
|Abrams Engineering Services GmbH & Co. KG||T*: +44 (0) 121 368 0910||www.premium-steel.co.uk||DISCLAIMER|
|Hannoversche Str. 38 • 49084 Osnabrueck / Germanyfirstname.lastname@example.org||shop.premium-steel.co.uk||IMPRINT|
|* The domestic service numbers listed here are used to reduce the costs for our clientele in Great Britain. You will be redirected to our native English speaking accounts managers in Germany.|